HX Jewelry | Ring Size Guide

The Ring Size Guide describes the various ring sizes. This detailed ring size guides should be useful for you and will help you to get the best fit for rings.

Ring Jewelry Size Guide

A ring should fit comfortably on the finger of the wearer as well as be snug enough to prevent it from accidentally falling off. The best and most accurate way to measure a ring size is by visiting a local jeweler. Jewelers use a set of graduated rings and other specialized tools to determine ring size. Ring size can also be measured easily at home by any of the following ways:

Ring Size Measurement by Ring’s Diameter

The diameter of a ring can be determined by measuring the distance across the middle inside. You can use the ring size circles below (based on ring’s diameter) for measuring your exact ring size. Please follow the steps listed below to get an accurate ring size:

Select a ring that fits comfortably on the finger for which you want to know the size.

Take a printout of the visual ring chart below as per the print instructions below.

Place your ring over the circles to match up with the nearest circle size to find the inside size of the ring.

If the ring falls in between two sizes, then it is advisable to go for the larger size.

Ring Size Measurement by Ring’s Circumference

The circumference of a ring is measured by the length around the inner circle. You can use the finger size strip below for measuring your exact ring size. Please follow the steps to get the accurate ring size:

Take a printout of the below as per the given print instructions.

Carefully cut this printout from the image outline to get a size strip. Also cut a slit inside the strip at the left end.

Wrap this size strip around the finger you wish to measure with the scale facing out and then slide the narrow end of the strip through the slit.

Pull the narrow end until the fit is snug. Try to move that fit through the largest part of the finger; this may be the knuckle.

The number that lines up at the slit represents the ring size for that finger.

HX Jewelry | Printable ring size chart

Print Instructions

To get accurate ring size results, please follow these print instructions:

You must make sure that you do not have ‘Shrink oversized pages to fit paper size’ or ‘Expand small pages to paper size’ selected in the Print Dialog Box.

You must also make sure that you have taken printouts without changing the image size either intentionally or unintentionally.

You can verify the sizes of the image printouts by measuring them with a ruler.

Tips for Measuring Accurate Ring Size

You should avoid measuring cold fingers as this is when fingers are at their smallest size.

You should measure your finger in warm temperatures at the end of the day.

If your ring size falls in between two ring sizes then it is advisable to go for the larger size.

Tips if you’re buying the Ring as a Surprise

You should try to find out from a reliable source; friend, parent, etc. what the intended recipient’s ring/finger size is.

You can also borrow your intended recipient’s best fitted ring and find out the ring size by using above mentioned diameter method.

Other Tips and Information

Engagement and wedding rings are traditionally worn on the ring finger on the left hand. The ring finger is located between the little finger and the middle finger.

Ring sizes are expressed differently in different countries. All sizes listed in the above images and in tips are standard American Sizes.

The average adult woman’s ring size ranges between sizes 5 to 7 whereas the average adult man’s ring size ranges between sizes 9 to 11.

International Conversion Chart for Ring Sizes

The following chart will be useful in conversion of measured ring size in inches or in millimeters to numbered size applicable in USA and Canada. This chart also shows ring sizes applicable in UK, Ireland, Australia, Japan and Switzerland.

Ring Sizes				Measured Sized
USA & Canada	UK, Ireland & Australia	Japan	Switzerland	Inside Diameter		Inside Circumference
USA & Canada	UK, Ireland & Australia	Japan	Switzerland	Inches	Millimeters	Inches	Millimeters
0				0.458	11.63	1.44	36.5
1/4				0.466	11.84	1.46	37.2
1/2	A			0.474	12.04	1.49	37.8
3/4	A 1/2			0.482	12.24	1.51	38.5
1	B	1		0.49	12.45	1.54	39.1
1 1/4	B 1/2			0.498	12.65	1.56	39.7
1 1/2	C			0.506	12.85	1.59	40.4
1 3/4	C 1/2			0.514	13.06	1.61	41.0
2	D	2	1.5	0.522	13.26	1.64	41.7
2 1/4	D 1/2			0.53	13.46	1.67	42.3
2 1/2	E	3	2.75	0.538	13.67	1.69	42.9
2 3/4	E 1/2			0.546	13.87	1.72	43.6
3	F	4	4	0.554	14.07	1.74	44.2
3 1/4	F 1/2	5	5.25	0.562	14.27	1.77	44.8
3 1/2	G			0.57	14.48	1.79	45.5
3 3/4	G 1/2	6	6.5	0.578	14.68	1.82	46.1
4	H	7		0.586	14.88	1.84	46.8
4 1/4	H 1/2		7.75	0.594	15.09	1.87	47.4
4 1/2	I	8		0.602	15.29	1.89	48.0
4 3/4	J		9	0.61	15.49	1.92	48.7
5	J 1/2	9		0.618	15.70	1.94	49.3
5 1/4	K		10	0.626	15.90	1.97	50.0
5 1/2	K 1/2	10		0.634	16.10	1.99	50.6
5 3/4	L		11.75	0.642	16.31	2.02	51.2
6	L 1/2	11	12.75	0.65	16.51	2.04	51.9
6 1/4	M	12		0.658	16.71	2.07	52.5
6 1/2	M 1/2	13	14	0.666	16.92	2.09	53.1
6 3/4	N			0.674	17.12	2.12	53.8
7	N 1/2	14	15.25	0.682	17.32	2.14	54.4
7 1/4	O			0.69	17.53	2.17	55.1
7 1/2	O 1/2	15	16.5	0.698	17.73	2.19	55.7
7 3/4	P			0.706	17.93	2.22	56.3
8	P 1/2	16	17.75	0.714	18.14	2.24	57.0
8 1/4	Q			0.722	18.34	2.27	57.6
8 1/2	Q 1/2	17		0.73	18.54	2.29	58.3
8 3/4	R		19	0.738	18.75	2.32	58.9
9	R 1/2	18		0.746	18.95	2.34	59.5
9 1/4	S		20.25	0.754	19.15	2.37	60.2
9 1/2	S 1/2	19		0.762	19.35	2.39	60.8
9 3/4	T		21.5	0.77	19.56	2.42	61.4
10	T 1/2	20		0.778	19.76	2.44	62.1
10 1/4	U	21		0.786	19.96	2.47	62.7
10 1/2	U 1/2	22	22.75	0.794	20.17	2.49	63.4
10 3/4	V			0.802	20.37	2.52	64.0
11	V 1/2	23		0.81	20.57	2.54	64.6
11 1/4	W		25	0.818	20.78	2.57	65.3
11 1/2	W 1/2	24		0.826	20.98	2.59	65.9
11 3/4	X			0.834	21.18	2.62	66.6
12	X 1/2	25	27.5	0.842	21.39	2.65	67.2
12 1/4	Y			0.85	21.59	2.67	67.8
12 1/2	Z	26	28.75	0.858	21.79	2.70	68.5
12 3/4	Z 1/2			0.866	22.00	2.72	69.1
13		27		0.874	22.20	2.75	69.7
13 1/4	Z1			0.882	22.40	2.77	70.4
13 1/2				0.89	22.61	2.80	71.0
13 3/4	Z2			0.898	22.81	2.82	71.7
14	Z3			0.906	23.01	2.85	72.3
14 1/4				0.914	23.22	2.87	72.9
14 1/2	Z4			0.922	23.42	2.90	73.6
14 3/4				0.93	23.62	2.92	74.2
15				0.938	23.83	2.95	74.8
15 1/4				0.946	24.03	2.97	75.5
15 1/2				0.954	24.23	3.00	76.1
15 3/4				0.962	24.43	3.02	76.8
16				0.97	24.64	3.05	77.4

Facts about International Ring Sizing

In the United States and Canada, ring sizes are specified using a numerical scale, with quarter and half sizes.

In the United Kingdom, Ireland and Australia, ring sizes are specified using an alphabetical scale, with half sizes.

In Japan, ring sizes are specified using a numerical scale, with only whole sizes.

In Switzerland, ring sizes are specified using a numerical scale, with quarter and half sizes.

In Europe (excluding Ireland and the UK), ring sizes are specified using a numerical scale, with half sizes.

Resizing your Ring

Most gold or silver rings can be resized by a skilled jeweler by way of soldering or stretching and compressing. However, some rings cannot be resized due to gemstone setting, plating, shape or surface design. Usually small resizing does not create problems, but more extreme resizing can noticeably impact the look and structure of your ring. Increasing the size of a ring typically requires gentle hammering and this will cause the shank of the ring to thin slightly. For decreasing or increasing the ring size, your jeweler may also remove or insert extra metal through soldering. Some jewelers do not resize platinum because of its density and strength.

Custom Jewelry

Explorer

HX Jewelry | Ring Size Guide

The Ring Size Guide describes the various ring sizes. This detailed ring size guides should be useful for you and will help you to get the best fit for rings.

Ring Jewelry Size Guide

Add A Coupon